Product Description
As the name suggests Valspar Acrylic Primer is two systems in one - a primer and a putty. This high build acrylic based product has unique properties that ensure that there is no need to apply seperate putties and primers. Valspar Acrylic primer can be applied over properly prepared steel and aluminium already coated with an etch. Valspar Acrylic Primer can also be applied directly to fiberglass and gelcoat.
Valspar Acrylic Primer is grey in colour and is thinned, Valspar 2:1 with 30MP Multipurpose thinners. AP33 is dry to sand in under and hour.
Stir the product for 2 minutes to ensure uniformity of the content
Apply single medium wet coats
Allow 5 - 7 minutes to flash off in between each coat
Minimum dry film thickness is 45 micron and maximum is 100 micron N.B. Do NOT apply in condtions where humidity exceeds 80%
Potlife - Indefinite
